System integrators and security technicians frequently encounter compatibility barriers when mixing hardware brands on a single local network. If you need to connect Hikvision IP camera to CP PLUS NVR, the devices will not communicate using their default proprietary protocols.

To link the devices, you must use the Hikvision SADP tool to modify the camera’s IPv4 network parameters to match the NVR’s subnet, then authenticate the video stream using the ONVIF protocol.

How to Configure Network Parameters via SADP Tool?

Cross-brand communication requires proper IP assignment. The Hikvision SADP (Search Active Devices Protocol) tool allows network administrators to locate and configure connected devices.

• Open the SADP tool on a computer connected to the same network switch as the security hardware.
• Identify the target Hikvision IP camera model (e.g., DS-2CD1023G0E-I, DS-2CD1323G0E-I, or DS-2CD2020F-I) from the generated online devices list.
• Select the device checkbox to activate the “Modify Network Parameters” panel on the right side of the interface.
• Enter a static IPv4 Address that aligns with the CP PLUS NVR subnet.
• Enter the corresponding IPv4 Gateway and Subnet Mask.
• Input the device Admin Password into the Security Verification field.
• Click Modify to write the new network settings to the camera.

How to Add the Camera to the NVR? (ONVIF Setup)

Once the camera possesses a static IP address on the correct subnet, the NVR can process the feed.

• Access the camera registration menu on the CP PLUS NVR interface.
• Select manual addition and change the connection protocol to ONVIF.
• Input the newly assigned Hikvision IPv4 Address.
• Enter the camera’s Admin Password to authenticate and initialize the live view.

Configuration Precautions

• Subnet Misalignment: The IPv4 address assigned in the SADP panel must exist on the exact same network segment as the CP PLUS NVR.
• Authentication Rejection: The SADP tool will block all IP modifications if the exact Admin Password is not entered in the Security Verification field.

Use Cases

• Deploying existing Hikvision IP camera units onto a newly installed CP PLUS recording system.
• Centralizing a multi-brand surveillance network using standard ONVIF interoperability.

About VisionIPC

VisionIPC is a global distributor for Hikvision cameras and Dahua CCTV systems, specializing in commercial security hardware distribution.

Contact US

Contact VisionIPC for wholesale equipment pricing, bulk orders, or direct technical consultation on how to connect Hikvision IP camera to CP PLUS NVR for your upcoming deployment.